Solutions to common faults of rotating horse

　　We know that the rotating horse equipment is often used, so there may be some small faults after using for a period of time, but many people do understand this phenomenon. In view of this phenomenon, we would like to ask the rotating horse manufacturer to introduce some common fault machine solutions for you.

1. Fault phenomenon: turn on the power switch, three-phase indicator light is on all on.

Cause: the indicator light is broken, the switch fuse is burnt out.

Troubleshooting: replace the indicator light replace the fuse.2. Fault phenomenon: press the light start button, the contactor is closed, but the light is on for one several ways.

Cause: the fuse on the light control panel is burnt out.

Troubleshooting: replace the fuse of the same type.

3. Fault phenomenon: the main engine can be started.

Causes: the three-phase fuse is burnt out the contact of thermal relay cannot be reset.

Troubleshooting: manual thermal relay reset button button to reset it.

4. Fault phenomenon: light, electric bell main engine can be started.

Cause: the emergency stop button is reset.

Troubleshooting: rotate the emergency button in the direction of the arrow to reset it.

The above is the rotating horse manufacturers on the fault introduction, if you want to further understand, welcome to contact us.